Ferrino Transalp 60 Lady Nut (75708ENN) Travel Backpack

Ferrino has developed a special line of tourist equipment that provides maximum comfort for girls, taking into account the anatomy of the female body. The main changes affected the shape of the harness and waist belt. The weight has also been slightly reduced. Otherwise, this model, like the entire series of Ferrino Transalp expedition backpacks, is distinguished by its large volume and a number of design solutions that increase the convenience and reliability of the backpack for a large amount of equipment. The suspension system with stepless adjustment has a double fixation, a hip belt with an increased thickness of polyurethane foam lining for greater comfort at maximum load. At two points with the greatest load, the backpack is reinforced with inserts made of durable Hypalon® material. The side straps are shifted to the center and lengthened, allowing you to fix a more voluminous tent. Additional equipment can be secured using a pair of lower ties and separate straps supplied in the kit. There are a pair of separate fasteners for poles and ice axes. Essential items can be placed in nine pockets of varying sizes (two on the front, two on the sides, three in the flap and two on the belt). When fully loaded, the presence of two front entrances becomes extremely important, making it easier to pack and unpack the necessary things. The backpack is very spacious inside, the lower compartment is separated by a partition, a winter sleeping bag fits in there without any problems. The volume of the upper compartment can be varied using an exhaust valve. The backpack is fully adapted for a hydration system. A voluminous protective rain cover is placed in the lower secret pocket.

With 150 years of experience in the production of equipment for tourism, Ferrino does not rest on its laurels, continuing to dictate even higher standards of tourist equipment. For this purpose, in 1994 a special high-altitude laboratory was built to test products in real conditions. For decades, the company has been cooperating with outstanding climbers (such as Reinhold Messner), researchers, cavers who, using Ferrino products, conquered all the highest points of the planet, crossed 20,000 km of Antarctica on foot at extremely low temperatures down to -70 ° C, descended for 80 minutes into the very depths of the earth, into the Cueva de los Cristales cave, where at a temperature of + 58 ° C and 100% humidity a person could not previously stay for more than 20 minutes even in special equipment. Ferrino is rightfully proud of its achievements and ensures the quality and functionality of its products at the highest level.

Technical specifications:

• Volume, l: 60
• Weight, kg: 2.35
• Dimensions, cm: 74x44x34
• Material: Supertex® / Polyester Jaquard Weave 500D PU - wear and tear resistant, water resistant material
• Color: Nut (brown)
• Purpose: trekking, backpacking, expeditions, long mountain and plain hiking trips

Suspension and backrest system:

• Suspension system: Double Ergo Adjustment Back
• Frame: semi-rigid, non-removable, consists of a U-shaped metal frame of an anatomical shape and a plastic panel with a central vertical aluminum plate of an anatomical shape, which ensure correct and uniform weight redistribution, help maintain the correct position of the spine when walking, while maintaining the lightness of the entire structure.
• Back: quick and convenient stepless adjustment of the suspension height with double locking. Large Y-shaped ventilation channel formed by soft rollers with a breathable lining made of polyurethane foam and EVA foam, covered with mesh fabric.
• Shoulder straps: height-adjustable, specially shaped to suit female anatomy, with soft polyurethane and EVA foam lining, lined with breathable mesh fabric, with elastic loops for fixing the drinking system tube
• Hip belt: non-removable, adjustable in tension, corresponding to female anatomy, with two pockets
• Chest strap: removable, height adjustable with elastic insert.

Design features:

Double Ergo Adjustment Back - a suspension system with stepless change of the backpack suspension height, allowing you to easily and quickly change, accurately and reliably fix the height of the backpack suspension. A U-shaped aluminum plate and a plastic panel with a central aluminum plate of anatomical shape are used as a frame. The back is ventilated using a wide Y-shaped channel formed by soft voluminous polyurethane foam rollers covered with breathable mesh fabric.

Trekking poles holders (2) - holders for trekking poles are placed at the top and bottom of the façade of a trekking backpack and, as a rule, are a combination of lower loops and upper elastic tightening cords with a lock. Less often, the lower loops are replaced with the same tightening cords. Such holders allow you to securely fix trekking poles and not load the interior space of the backpack with them. This backpack has two pairs of fastenings for trekking poles, combined with fastenings for ice axes.

Gear Straps - straps on fastex for attaching additional equipment such as a tent, awning, self-inflating or polyurethane foam tourist mat, placed at the bottom of the backpack in such a way as not to hinder movement while walking. If necessary, these straps can be used as compression straps to tighten the bottom of the backpack. This model uses two straps.

Bottom Access - a front zippered entrance at the bottom of the backpack provides access to the contents of the bottom compartment of the backpack, separated from the main compartment. The front entrance can also be used to access the main compartment of the backpack, provided that the partition between the compartments is open. The bottom compartment with a front entrance is convenient to use for placing things such as a sleeping bag, shoes, etc.

Front Access (Full) - a front entrance in the form of a semicircular zipper in the central part of the backpack provides access to the contents of the main compartment of the backpack. The full front entrance is very convenient for quickly packing the backpack. Also, in cases where the backpack is packed to the brim, using the front entrance you can quite easily get out any necessary thing (raincoat, sleeping bag) and all other things will not fall out and will remain in their place.

Side Compression - the side compression straps of the backpack can be used to attach equipment such as a camping mat, tent or trekking poles to the sides of the backpack, which is very important when the internal space of the backpack is already occupied. Also, the compression straps can be used for their intended purpose to tighten and reduce the external volume of the packed backpack. In this model, the side straps are shifted to the center of the front to secure more voluminous equipment.

Removable Straps - the backpack comes complete with two long straps ending in three-slot plastic Duraflex® straps. The straps are used to attach equipment such as a tent, sleeping pad, snowshoes. The straps can be fixed to specially designed loops or straps of the backpack at the bottom, as well as to any other backpack straps of suitable width.

Materials:

• Supertex® is a modern material with a 600D thread thickness and PU coating, which, due to its strength and water resistance, is widely used for car awnings, pool covers, tents, athletic mats, etc. After applying a load, the material retains its original shape without tearing or stretching, is easy to clean, does not fade from moisture and does not burn out in the sun.

• Polyester Jaquard Weave 500D PU is a beautiful, durable and lightweight fabric with a voluminous small pattern, containing more than 24 complexly interwoven polyester threads of 500D thickness. The fabric is durable, resistant to abrasion and deformation, retains color well, is weakly affected by temperature changes and is not destroyed by ultraviolet radiation. PU impregnation makes the fabric waterproof.

• Hypalon® - chlorosulfonated polyethylene. A long-life material patented by DuPont. It is exceptionally resistant to abrasion, tearing, scratching, UV radiation, low and high temperatures. It is used in backpack construction elements that are most often subject to stretching and are constantly in use.

• Duraflex hardware - American company National Molding Corporation - the largest manufacturer of plastic fittings under the Duraflex brand, which is the standard for tourist equipment. Plastic fittings are made of durable polyamide 6.6, developed by Dupont. Products withstand significant mechanical and temperature loads and are almost eternal. This backpack is equipped with Duraflex fittings

Equipment:

• Backpack
• Protective rain cover
• Sling with three-slot strap (170 cm) - 2 pcs.

Manufacturer: Ferrino (Italy)

Warranty period: 2 years