Ferrino Tuscania 30+5 Khaki Travel Backpack

Tuscania 30+5 Khaki was developed by Ferrino in collaboration with the 1st Armed Parachute Regiment of Italy and is one of the most multifunctional Ferrino backpacks, designed for all types of mountain activities, both in summer and winter. The main feature of this model is the full front access to the main compartment, which greatly facilitates packing and unpacking the backpack, both in standard and non-standard situations. Another interesting design solution is the parallel external and internal access to two front pockets. The anatomical breathable back of the backpack provides a comfortable fit and has a completely removable frame, making the backpack not only lighter, but also suitable for carrying a laptop in the compartment for the hydration system. When using the backpack as intended, the side, front fasteners, internal and external fasteners and loops, together with additional straps, allow you to secure almost any equipment, from trekking poles and an avalanche probe to a helmet, snowboard and skis. If you need to place more things, just unzip the semicircular zipper on the backpack, increasing the volume by five liters. To place the most necessary small things, there is a zippered pocket located on the waist belt. A rain cover is placed in a secret pocket at the bottom, protecting the backpack from getting wet. The most important structural units are reinforced with durable Hypalon® material. The backpack is functional, comfortable and reliable.

With more than a century of experience in the production of equipment for tourism, Ferrino does not rest on its laurels, continuing to dictate even higher standards of tourist equipment. For this purpose, in 1994 a special high-altitude laboratory was built to test products in real conditions. For decades, the company has been cooperating with outstanding climbers (such as Reinhold Messner), researchers, speleologists, who, using Ferrino products, conquered all the highest points of the planet, crossed 20,000 km of Antarctica on foot at extremely low temperatures down to -70 ° C, descended for 80 minutes into the very depths of the earth, into the Cueva de los Cristales cave, where at a temperature of + 58 ° C and 100% humidity a person could not previously stay for more than 20 minutes even in special equipment. Ferrino is rightfully proud of its achievements and ensures the quality and functionality of its products at the highest level.

Technical specifications:

• Volume, l: 35 (30+5)
• Weight, kg: 1.4 (1.15 kg without removable frame and additional straps)
• Dimensions, cm: 54x30x29
• Material: Supertex® / Double Tech - wear and abrasion resistant, waterproof material
• Color: Khaki
• Purpose: mountaineering, ski mountaineering, ski touring, alpine skiing, snowboarding, for tactical tasks

Suspension and backrest system:

• Suspension system: Air Convector Tech Back
• Frame: semi-rigid, removable, consists of a T-shaped metal plate of an anatomical shape and a plastic panel, which ensure correct and even redistribution of weight, help maintain the correct position of the spine when walking, while maintaining the lightness of the entire structure.
• Back: Thanks to the Air Convector Tech Back system, it is soft but well ventilated. Ventilation channels allow air to circulate between the back and the backpack. The rollers with soft polyurethane foam lining are covered with breathable mesh fabric.
• Shoulder straps: height-adjustable, anatomically shaped with soft polyurethane foam lining, covered with breathable mesh fabric, have loops for fixing the hydration system tube.
• Hip belt: non-removable, adjustable tension, with zipped pocket
• Chest strap: removable, height adjustable with elastic insert and built-in whistle

Design features:

Air Convector Tech Back is a well-ventilated, ergonomic mesh backpack back. The polyurethane foam base in the form of pillows has double the rigidity, and, at the same time, provides high air permeability. Ventilation channels and large mesh cells easily let fresh air to the back and remove excess moisture. The frame is partially removable. The back is complemented by a hip belt to distribute the load and ensure stability when walking. The belt is made of similar materials.

Front Access (Full) - the front entrance in the central part of the backpack provides full access to the contents of the main compartment of the backpack. The full front entrance is very convenient for quickly packing the backpack. Also, in cases where the backpack is packed to the brim, using the front entrance you can quite easily get out any necessary thing (raincoat, sleeping bag) and all other things will not fall out and will remain in their place.

Inside Holders - the so-called internal holders are two narrow straps with a Velcro textile fastener, placed on the sides of the backpack's back from the inside. These holders are used to securely fix such equipment as folding trekking poles, an avalanche probe, an avalanche shovel, an axe, etc. inside. It is especially convenient to use internal holders when the terrain or the complexity of the hike do not allow you to place attachments outside the backpack.

Helmet holder - this backpack is equipped with a special mount for a mountaineering helmet or a bicycle helmet. The mount is very simple and consists of two loops on the sides of the backpack. The fixing strap of the helmet or helmet is threaded through these loops and tightened securely. Each loop is stitched with a reinforced seam - thus, the helmet or helmet will be securely fastened.

Gear Loops - Special large loops on the backpack, designed for hanging additional equipment. The loops are made of durable nylon straps, folded in half and stitched to ensure greater reliability, and most importantly, ease of hanging and quickly removing equipment such as flasks, cups, mountaineering quickdraws, mountaineering carabiners, etc.

Rain cover - a protective rain cover can protect the backpack from getting wet during snow or rain. Such covers provide water resistance at a pressure of 10,000 m of water column. The cover covers the front and all side parts of the backpack and reliably protects against moisture penetration along the perimeter. The cover is hidden in a special pocket at the bottom of the backpack and, if necessary, can be removed completely.

Materials:

• Supertex® is a modern material with a 600D thread thickness and PU coating, which, due to its strength and water resistance, is widely used for car awnings, pool covers, tents, athletic mats, etc. After applying a load, the material retains its original shape without tearing or stretching, is easy to clean, does not fade from moisture and does not burn out in the sun.

• Double Tech is a 210D polyester fiber material with a reinforcing Double Ripstop weave structure and an internal PU coating. Due to this combination, with a small weight, the material has increased strength and protection from moisture.

• Hypalon® - chlorosulfonated polyethylene. A long-life material patented by DuPont. It is exceptionally resistant to abrasion, tearing, scratching, UV radiation, low and high temperatures. It is used in backpack construction elements that are most often subject to stretching and are constantly in use.

• Duraflex hardware - American company National Molding Corporation - the largest manufacturer of plastic fittings under the Duraflex brand, which is the standard for tourist equipment. Plastic fittings are made of durable polyamide 6.6, developed by Dupont. Products withstand significant mechanical and temperature loads and are almost eternal. This backpack is partially equipped with Duraflex fittings, including fastexes that change position on the strap.

• Nifco hardware - the Japanese company Nifco is a well-known manufacturer of high-quality plastic fittings for the automotive industry and textiles. This backpack partially uses Nifco plastic fittings.

• ITW Nexus hardware is an Asian company specializing exclusively in the production of high-quality fittings for military ammunition, camping gear and everyday textiles. Having released its first revolutionary buckle in 1977, ITW Nexus today, as a market leader, continues to produce hundreds of items of plastic fittings. This backpack is equipped with a plastic whistle ITX Nexus.

Equipment:

• Backpack
• Protective rain cover
• Sling with three-slot strap (170 cm) - 2 pcs.

Manufacturer: Ferrino (Italy)

Warranty period: 2 years