Projection Clock Bresser Colour TP Black

The original Bresser Colour TP projection clock with a colour display is equipped with a projector, thanks to which not only the time but also the temperature is projected onto both the wall and the ceiling.

Peculiarities:

• Elegant design and color display
• Projecting information on a wall or ceiling
• Measuring internal and external temperature.
• Temperature change trend
• Display temperature in °C or °F
• Display of time, date, day of the week, sound signal
• Indoor/outdoor temperature indication
• Automatic radio-controlled clock by signal from Frankfurt (DCF-77)
• 12 or 24 hour time display format
• Red LED Projector with Adjustable Focus
• Constant, LED, adjustable brightness display backlight when powered by a power supply
• Dual alarm clock with snooze function
• Room light sensor.
• Automatic recording of minimum and maximum values ​​of temperature and relative humidity

Technical specifications

• Units of measurement: ºС or ºF
• Measurement range: -5°C to +50°C (23°F to 122°F)
• Measurement resolution: 0.1°C or 0.14°F
• Measurement accuracy: +/- 1°C (+/- 14°F)
• Automatic recording of minimum and maximum temperature values

External temperature:

• Units of measurement: ºС or ºF
• Measuring range: -20°C to +60°C (-4°F to 140°F)
• Measurement resolution: 0.1°C or 0.14°F
• Measurement accuracy: +/- 1°C (+/- 14°F)
• Automatic recording of minimum and maximum temperature values

Watch:

• The clock is automatically radio-controlled by a signal from Frankfurt (DCF-77). The signal is based on an atomic clock powered by the Cesium 133 atom and is under the jurisdiction of the Physics and Technology Federal Institute in Braunschweig (Germany). The error is less than one second in one million years. The exact time transmitted by the DCF77 transmitter is official in Germany. The transmitter is located in Mainflingen - 30 km from Frankfurt am Main and with its radius (about 1500 km) covers almost all of Europe and part of Ukraine. Please note that in the eastern regions of Ukraine the signal reception is unstable.
• Possibility of manual time setting by turning off the radio signal (DCF-77)
• Time format: 12 or 24
• Two alarm clocks with snooze function.

Backlight:

• The color display has a wide viewing angle
• Constant display backlight when operating from a power supply.
• Room light sensor.
• The display brightness automatically changes depending on the intensity of external light.

• black

Transferring data from an external sensor:

• Data transfer frequency: 433 MHz
• Data transmission range: up to 30 m. line of sight

• Watch: 105 x 168 x 41 mm.
• Thermo-hygrosensor: 150 x 39 x 19 mm.

• Clock: AC/DC 5.0V power adapter (included)
• Sensor: 2 x AA 1.5 V batteries (purchased separately).
• It is recommended to use alkaline batteries (Duracell, Energizer and similar)

Wireless Temperature and Humidity Sensor Installation Guide

In order to obtain accurate readings and extend the life of your sensor, we recommend that you install it in a protected location to avoid moisture and direct sunlight. Do not wrap the sensor in a plastic bag. We recommend installing it outside on the outside of a window as shown in the picture below or in any other suitable location.