Ferrino Lynx 25 Black/Red Travel Backpack

The Ferrino Lynx backpack series is designed primarily for professional ski mountaineering and ski touring competitions, as well as other skiing disciplines and mountaineering. Ferrino Lynx is thought out to the smallest detail and has a number of design features that are unique to these backpacks, such as a specially designed quick-release ski mount, a quick release backpack system, a loop for coupling and, if necessary, towing a second skier, a special compartment for mountaineering crampons and compartments with locks for an avalanche shovel and an avalanche probe. In addition to such specialized design solutions, Ferrino Lynx 25 Black/Red is fully compatible with a hydration system, has a comfortable hip belt and a chest strap with a whistle, is equipped with side compression straps for fixing skis or other equipment, has external loops for carabiners and removable locks for an ice axe and trekking poles. The interior of the backpack is also optimized for placing and fixing various equipment. Small essentials can be placed in open side pockets made of elastic mesh or in a closable pocket on the waist belt. Ferrino Lynx 25 Black/Red has a low weight, thanks to the use of lightweight material, a ventilated back, straps and belt, and is also equipped with reliable fittings from the best manufacturers.

With more than a century of experience in the production of equipment for tourism, Ferrino does not rest on its laurels, continuing to dictate even higher standards of tourist equipment. For this purpose, in 1994 a special high-altitude laboratory was built to test products in real conditions. For decades, the company has been cooperating with outstanding climbers (such as Reinhold Messner), researchers, speleologists, who, using Ferrino products, conquered all the highest points of the planet, crossed 20,000 km of Antarctica on foot at extremely low temperatures down to -70 ° C, descended for 80 minutes into the very depths of the earth, into the Cueva de los Cristales cave, where at a temperature of + 58 ° C and 100% humidity a person could not previously stay for more than 20 minutes even in special equipment. Ferrino is rightfully proud of its achievements and ensures the quality and functionality of its products at the highest level.

ENSA (École nationale du ski et de l'alpinisme). Ferrino is the official supplier of the National School of Skiing and Mountaineering, located in Chamonix (France). This organization is engaged in the support and development of mountain sports, as well as the training of mountain guides, ski instructors and mountain rescuers. The Ferrino Lynx 25 Black/Red backpack is an official product for ENSA.

Technical specifications:

• Volume, l: 25
• Weight, kg: 0.57 (0.545 kg without removable ski and ice axe mounts)
• Dimensions, cm: 46x32x24
• Material: Polyester Diamond HD PU - lightweight and durable material with 210D thread thickness, tight weave and waterproof PU coating
• Color: Black/Red
• Purpose: ski mountaineering, ski touring, skiing, mountaineering

Suspension and backrest system:

• Back: anatomical with soft polyurethane foam lining
• Shoulder straps: with quick release system, height adjustable, anatomically shaped with soft polyurethane foam lining, lined with breathable mesh fabric, with loops for fixing the drinking system tube and a hook for fixing the ski mount.
• Hip belt: non-removable, adjustable in tension, with a pocket.
• Chest strap: removable, height adjustable with elastic insert and built-in whistle

Design features:

Breathable Back - this ventilation system provides excellent breathability of the back and hip belt of the backpack. Improved ventilation and air circulation occurs due to a special open cellular structure of the padding polymer material in combination with a durable mesh with an increased cell diameter.

Breathable "O" System Back - super ventilation of the backpack's shoulder straps is provided by pre-formed "O"-shaped macro ventilation channels in the polyurethane foam base and ultra-breathable mesh fabric with large cells. This system especially quickly removes moisture from under the shoulder straps and waist belt.

Trekking poles holders (2) - holders for trekking poles are placed at the top and bottom of the façade of a trekking backpack and, as a rule, are a combination of lower loops and upper elastic tightening cords with a lock. Less often, the lower loops are replaced with the same tightening cords. Such holders allow you to securely fix trekking poles and not load the interior space of the backpack with them. This backpack has two pairs of fasteners for trekking poles.

Inside Holders - the so-called internal holders are two narrow straps with a Velcro textile fastener, placed on the sides of the backpack's back from the inside. These holders are used to securely fix such equipment as folding trekking poles, an avalanche probe, an avalanche shovel, an axe, etc. inside. It is especially convenient to use internal holders when the terrain or the complexity of the hike do not allow you to place attachments outside the backpack.

Gear Loops - Special large loops on the backpack, designed for hanging additional equipment. The loops are made of durable nylon straps, folded in half and stitched to ensure greater reliability, and most importantly, ease of hanging and quickly removing equipment such as flasks, cups, mountaineering quickdraws, mountaineering carabiners, etc.

Materials:

• Polyester Diamond HD PU - polyester fiber with a thread thickness of 210D and a high weave density. The fabric is very light, has an excellent weight-to-strength ratio, and is resistant to water penetration due to its density and PU impregnation.

• Hypalon® - chlorosulfonated polyethylene. A long-life material patented by DuPont. It is exceptionally resistant to abrasion, tearing, scratching, UV radiation, low and high temperatures. It is used in backpack construction elements that are most often subject to stretching and are constantly in use.

• YKK zipper is a Japanese company - the world leader in the production of zippers. The company's production facilities are located in hundreds of factories in more than 70 countries. More than half of all branded zippers in the world are produced under the YKK brand. Today, as 80 years ago, the abbreviation YKK is synonymous with impeccable quality and long service life. This backpack is equipped with YKK zippers.

• Duraflex hardware - American company National Molding Corporation - the largest manufacturer of plastic fittings under the Duraflex brand, which is the standard for tourist equipment. Plastic fittings are made of durable polyamide 6.6, developed by Dupont. Products withstand significant mechanical and temperature loads and are almost eternal. This backpack is partially equipped with Duraflex fittings

• Woojin Plastic is a Korean family-owned company that has been producing fittings since 1979, under the WooJin brand since 2009. Today, the company is one of the five largest manufacturers of fittings for textile products, has more than 80 patents and is proud of the price-quality ratio of its products. This model uses a WooJin whistle

Equipment:

• Backpack

Manufacturer: Ferrino (Italy)

Warranty period: 2 years