Ferrino Sling 2 Green Tent (99108HVV)

The Ferrino Sling 2 Green tent belongs to the Ferrino series of three-season tents and will be a godsend for those looking for a lightweight tent with sufficient interior space, a roomy vestibule and minimal setup time. All these advantages are provided by the tunnel design of the tent. Despite the fact that the tent is two-layered, its assembled weight is less than nine hundred grams per person. The inner tent is completely made of mosquito netting; it can be used separately from the outer awning on warm nights. The degree of water protection is quite sufficient to keep the tent dry inside during rain, if properly installed. The effective Camera Air ventilation system is supplemented by two ventilation windows to prevent condensation. The tent cover has compression straps, which allows achieving very compact dimensions of the packed tent.

Ferrino gained its fame almost one hundred and fifty years ago thanks to the production of waterproof tents and awnings. Ferrino tents have been repeatedly used not only in cold climates during ascents of all eight-thousanders and in record-breaking expeditions to Antarctica, but also during desert crossings on foot. Today Ferrino is a supplier of tents for many peacekeeping missions (including the UN) and mountain rescue organizations, which is an undoubted fact of recognition of functionality and reliability. Nevertheless, the company does not rest on its laurels, continuing to dictate even higher standards of tourist equipment. For this purpose, in 1994 a special high-altitude laboratory was built for testing products in real conditions. Ferrino is rightfully proud of its achievements and ensures the quality and functionality of its products at the highest level.

Perfluorinated and polyfluorinated compounds (PFS) are a group of chemicals that are quite harmful to the environment and the human body. Possessing water-repellent and dirt-repellent properties, PFS are often used in impregnations of fabrics of functional clothing and equipment for active recreation and tourism. PFS decompose slowly in nature and tend to accumulate in the human body. And since there is no general ban, most manufacturers continue to use PFS. Ferrino, as a responsible leading European manufacturer of tourist equipment, has refused to use PFS and introduced DWR impregnations that are safe for humans and the environment to impart water protection to its tents.

Technical specifications:

• Type: tent
• Shape: tunnel
• Capacity, persons: 2
• Total number of entrances/rooms: 1 / 1
• Construction: two-layer
• Availability of vestibule / quantity: yes / 1
• Frame: aluminum alloy Alu 7001 T6, ∅ 8.5 mm, 2 pre-curved arches (1 arch - 270 cm / 9 sections, 1 arch - 174 cm / 5 sections)
• Material of the outer awning: Polyester 70D 190T Diamond PU DWR PFC-Free, 2000 mm w.c., polyurethane, water-repellent impregnation without PFC, has thermal insulation properties, weight - 75 g / m²
• Inner tent material: Polyester 40D mosquito net
• Bottom material: Polyester 70D 210T PU DWR PFC-Free, 2500 mm w.c., taped seams, polyurethane, water-repellent impregnation without PFC, has heat-insulating properties, weight - 85 g / m²
• Mosquito net material: Polyester 40D
• Purpose: tourism, cycling
• Color: Green

Dimensions and weight:

• Inner tent (LxWxH), mm: 2200 x 1200 x 1000
• Outer tent (LxWxH), mm: 2700 x 1200 x 1000
• Folded, mm: ∅ 140 x length 390
• Internal volume of the tent, m³: 0.9
• Tent weight (without cover, repair kit and pegs), kg: 1.5
• Tent weight (fully equipped), kg: 1.7

Design features:

• The main advantages of a tunnel tent with an end vestibule are the most efficient use of the tent's internal volume and a truly spacious vestibule. In addition, this design is lighter than others and requires a minimum of time for installation.
• The arcs are marked using anodizing in different colors.
• The inner tent is attached to the poles using sleeves through which the poles are threaded.
• The entrance to the tent is equipped with a mosquito net.
• The design includes two ventilation windows located on the sides of the tent entrance. The Camera Air ventilation system creates a large air chamber between the outer tent and the inner tent, which facilitates free air circulation around the inner tent. On the one hand, this eliminates the appearance of condensation inside, and on the other hand, air is the best heat-insulating layer.
• The material of the awning and the floor of the inner tent has triple reinforcement at points with an expected increased load. The reinforcement is made in the form of an additional layer of high-strength fabric
• There are two pockets inside the tent for small items.
• The tent is equipped with a hook for hanging a camping lantern inside.
• The tent cover is equipped with two compression straps on fastex and has sewn-in instructions for setting up the tent.

Materials:

• Alu 7001 T6 is an aluminum alloy based on Al-Zn-Mg-Cu, which has the property of gaining strength after heat treatment. Alu 7001 T6 is quite light, and, in comparison with other alloys, has a higher tensile strength, a high modulus of elasticity and a low coefficient of residual deformations, due to which today it is the standard for the production of high-quality arches of tourist tents.

• Polyester 70D 190T Diamond PU DWR PFC-Free, 2000 mm w.c. - lightweight fabric with a thread thickness of 70D, a density of 190T, and a weight of 75 g / m² , resistant to UV radiation, does not stretch when wet, has high puncture resistance. Internal polyurethane impregnation provides resistance to moisture penetration, corresponding to a hydrostatic pressure of 2000 mm w.c. Hydrophobic impregnation without the use of PFC has water-repellent properties. The fabric has thermal insulation properties.

• Polyester 40D - fabric with a thread thickness of 40D, resistant to UV radiation, does not stretch when wet.

• Polyester 70D 210T PU DWR PFC-Free, 2500 mm w.c. - fabric with a thread thickness of 70D, a density of 210T, and a weight of 85 g / m² , is resistant to UV radiation, does not stretch when wet, has high resistance to abrasion and punctures. Internal polyurethane impregnation provides resistance to moisture penetration, corresponding to a hydrostatic pressure of 2500 mm w.c. Hydrophobic impregnation without the use of PFC has water-repellent properties. The fabric has thermal insulation properties.

• Duraflex hardware - American company National Molding Corporation - the largest manufacturer of plastic fittings under the Duraflex brand, which is the standard for tourist equipment. Plastic fittings are made of durable polyamide 6.6, developed by Dupont. The products withstand significant mechanical and temperature loads and are almost eternal. The cover of this tent is equipped with Duraflex fastexes

Compliance with standards:

• ISO 811-1981 - Hydrostatic pressure testing to determine the resistance of a material to water penetration confirms the declared waterproofness of a tent
• ISO 5912:2011 - the dimensions of the sleeping areas of the tents and the materials used meet the requirements of this standard and guarantee safe and comfortable use

Equipment:

• External awning - 1 pc.
• Inner tent - 1 pc.
• Folding aluminum arcs - 2 pcs.
• Pegs (aluminum): 12 pcs.
• Repair kit (for arcs, outer awning and mosquito net): 1 pc.
• Cover made of fabric with DWR impregnation, with a zipper, a handle and compression straps on fastex: 1 pc.

Features of operation and maintenance to extend service life:

• If possible, it is not recommended to fold and pack the tent if it is wet. If it is not possible to completely dry the tent immediately, it should be done at home.
• After complete drying, before packing, it is necessary to shake the tent well, shake out everything from the inside and clean the outer surface.
• Do not use gasoline or other chemical solvents to clean stains. Use only mild soap, water and a soft brush or sponge.
• After use, the tent poles and pegs must be cleaned of any dirt using a damp sponge, then wiped dry and packed.
• Always store your tent in a dry, preferably ventilated place.
• Wash and deep clean the tent only in accordance with the recommendations indicated on the tent label.

Manufacturer: Ferrino (Italy)

Warranty period: 2 years

| Manufacturer code: 923871 Parameters: Product status BN_NAL: CAL Warranty: 24 months Country of brand registration: Italy Country of origin: China Package dimensions: 39 x 14 x 14 cm Dimensions: 270 x 120 x 100 cm Weight: 1.7 kg Packaging: Cover with compression straps on fasteners. Season: Three-season Floor covering: Polyester 70D 210T PU DWR PFC-Free, 2500 mm w.c. Inner tent: Polyester 40D Outer awning: Polyester 70D 190T Diamond PU DWR PFC-Free, 2000 mm w.c. Equipment: Outer awning, cover made of waterproof fabric with PU coating and DWR impregnation with a handle and compression straps on fastexes, arcs, pegs, repair kit Frame: Arcs made of aluminum alloy Alu 7001 T6, ∅ 8.5 mm Capacity: Double Construction: Double layer Purpose: Trekking Form: Tunnel Type: Tents