Tent Ferrino Nemesi 1 Olive Green (91166LOOFR)

The Ferrino Nemesi 1 Olive Green tent belongs to the Ferrino Lite series of ultra-light tents. This model has an increased waterproofness of the tent bottom up to 8000 mm of water column and is most suitable for long autumn-spring hikes, when a large amount of precipitation is potentially possible. The tent has one open and one closed vestibule, allowing you to place a significant amount of equipment there. The large useful internal volume of the tent, due to the hub design, in turn also contributes to additional comfort on a long hike. At the same time, installing such a tent will require a minimum of space. The inner tent is 75% mosquito net, it can be used separately from the outer awning on warm nights. The outer awning has a water resistance of 3000 mm of water column, which is quite sufficient, if properly installed, to keep the tent dry inside during the rain. The effective Camera Air ventilation system is supplemented by two ventilation windows, which will help to avoid condensation. The tent cover has compression straps, which allows the packed tent to be very compact in size.

Ferrino gained its fame almost one hundred and fifty years ago thanks to the production of waterproof tents and awnings. Ferrino tents have been repeatedly used not only in cold climates during ascents of all eight-thousanders and in record-breaking expeditions to Antarctica, but also during desert crossings on foot. Today Ferrino is a supplier of tents for many peacekeeping missions (including the UN) and mountain rescue organizations, which is an undoubted fact of recognition of functionality and reliability. Nevertheless, the company does not rest on its laurels, continuing to dictate even higher standards of tourist equipment. For this purpose, in 1994 a special high-altitude laboratory was built for testing products in real conditions. Ferrino is rightfully proud of its achievements and ensures the quality and functionality of its products at the highest level.

Perfluorinated and polyfluorinated compounds (PFS) are a group of chemicals that are quite harmful to the environment and the human body. Possessing water-repellent and dirt-repellent properties, PFS are often used in impregnations of fabrics of functional clothing and equipment for active recreation and tourism. PFS decompose slowly in nature and tend to accumulate in the human body. And since there is no general ban, most manufacturers continue to use PFS. Ferrino, as a responsible leading European manufacturer of tourist equipment, has refused to use PFS and introduced DWR impregnations that are safe for humans and the environment to impart water protection to its tents.

Technical specifications:

• Type: tent
• Shape: dome (hemisphere) with hub connection of arcs
• Capacity, persons: 1
• Total number of entrances/rooms: 1 / 1
• Construction: two-layer
• Availability of vestibule / quantity: yes / 2
• Frame: aluminum alloy Alu 7001 T6, ∅ 8.5 mm, 4 arches (1 arch - 239 cm / 10 sections, 2 arches - 98 cm / 4 sections, 1 arch - 45.5 cm / 2 sections)
• Material of outer awning: Polyester 70D Ripstop PU DWR PFC-Free FR, 3000 mm w.c., taped seams, reinforced Ripstop structure, water-repellent and fire-resistant impregnation without PFC, weight - 85g/m²
• Inner tent material: Polyester 70D DWR PFC-Free FR, water-repellent and fire-resistant impregnation without PFC / Mosquito net Polyester 40D
• Bottom material: Polyester 70D Ripstop PU DWR PFC-Free FR, 8000 mm w.c., taped seams, water-repellent and fire-resistant impregnation without PFC, weight - 95g/m²
• Mosquito net material: Polyester 40D
• Purpose: tourism, cycling
• Color: Olive Green

Dimensions and weight:

• Inner tent (LxWxH), mm: 2100 x 700 x 900
• Outer tent (LxWxH), mm: 2100 x 1700 x 900
• Folded, mm: ∅ 130 x length 340
• Internal volume of the tent, m³: 0.9
• Tent weight (without cover, repair kit and pegs), kg: 1.5
• Tent weight (fully equipped), kg: 1.7

Design features:

• The main advantages of a dome tent with a hub connection of arcs and a transverse cantilever arc are achieving optimal awning tension and minimum weight with maximum usable internal space.
• The arcs are marked using anodizing in different colors.
• The inner tent is attached to the poles using hooks.
• The entrance to the tent is equipped with a mosquito net.
• The design provides two ventilation windows located on the side of the entrance and the opposite side of the tent. The Camera Air ventilation system creates a large air chamber between the outer awning and the inner tent, which facilitates free air circulation around the inner tent. On the one hand, this eliminates the appearance of condensation inside, and on the other hand, air is the best heat-insulating layer.
• The material of the awning and inner tent is triple reinforced at points with expected increased load. The reinforcement is made in the form of an additional layer of high-strength fabric
• The quick fixing system of the guy ropes is achieved by using specially shaped fittings. The guy rope is tensioned and fixed in just one movement.
• There are two large pockets inside the tent for small items.
• The tent is equipped with a hook for hanging a camping lantern inside.
• The tent cover is equipped with two compression straps on fastex, has sewn-in instructions for setting up the tent and a side pocket for separate placement of pegs and a repair kit.
• The aluminum pegs have a hexagonal profile, which increases bending resistance and improves fixation in the ground.

Materials:

• Alu 7001 T6 is an aluminum alloy based on Al-Zn-Mg-Cu, which has the property of gaining strength after heat treatment. Alu 7001 T6 is quite light, and, in comparison with other alloys, has a higher tensile strength, a high modulus of elasticity and a low coefficient of residual deformations, due to which today it is the standard for the production of high-quality arches of tourist tents.

• Polyester 70D Ripstop PU DWR PFC-Free FR, 3000 mm w.c. - lightweight fabric with a thread thickness of 70D and a weight of 85 g / m² , resistant to UV radiation, does not stretch when wet, has increased tensile strength due to the Ripstop weave structure and high puncture resistance. Internal polyurethane impregnation provides resistance to moisture penetration, corresponding to a hydrostatic pressure of 3000 mm w.c. Hydrophobic impregnation without the use of PFC has water-repellent properties. Special impregnation protects the fabric from ignition.

• Polyester 70D DWR PFC-Free FR - fabric with a thread thickness of 70D, resistant to UV radiation, does not stretch when wet. Double-sided hydrophobic impregnation without the use of PFC has water-repellent properties. Special impregnation protects the fabric from ignition.

• Polyester 70D PU DWR PFC-Free FR, 8000 mm w.c. - fabric with a thread thickness of 70D and a weight of 95 g / m² , resistant to UV radiation, does not stretch when wet, has high resistance to abrasion and punctures. Internal polyurethane impregnation provides resistance to moisture penetration, corresponding to a hydrostatic pressure of 8000 mm w.c. Hydrophobic impregnation without the use of PFC has water-repellent properties. Special impregnation protects the fabric from ignition.

Compliance with standards:

• ISO 811-1981 - Hydrostatic pressure testing to determine the resistance of a material to water penetration confirms the declared waterproofness of a tent
• ISO 5912:2011 - the dimensions of the sleeping areas of the tents and the materials used meet the requirements of this standard and guarantee safe and comfortable use
• CPAI84 - this standard confirms compliance with the standards and requirements for fire resistance of materials of the outer awning, inner tent and tent bottom and applies exclusively to tourist and camping tents.

Equipment:

• External awning - 1 pc.
• Inner tent - 1 pc.
• Folding aluminum arcs - 4 pcs.
• Pegs (aluminium, with hexagonal profile): 11 pcs.
• Repair kit (for arcs, outer awning, inner tent and mosquito net): 1 pc.
• Ripstop fabric cover with DWR impregnation, with compression straps on fastex and a handle: 1 pc.

Features of operation and maintenance to extend service life:

• If possible, it is not recommended to fold and pack the tent if it is wet. If it is not possible to completely dry the tent immediately, it should be done at home.
• After complete drying, before packing, it is necessary to shake the tent well, shake out everything from the inside and clean the outer surface.
• Do not use gasoline or other chemical solvents to clean stains. Use only mild soap, water and a soft brush or sponge.
• After use, the tent poles and pegs must be cleaned of any dirt using a damp sponge, then wiped dry and packed.
• Always store your tent in a dry, preferably ventilated place.
• Wash and deep clean the tent only in accordance with the recommendations indicated on the tent label.

Tent Assembly Instructions: Ferrino Nemesi 1 (8000) Olive Green

Manufacturer: Ferrino (Italy)

Warranty period: 2 years

| Manufacturer code: 923825 Parameters: Product status BN_NAL: CAL Warranty: 24 months Country of brand registration: Italy Country of origin: China Package dimensions: 13 x 13 x 34 cm Dimensions: 210 x 170 x 90 cm Weight in packaging: 1.8 kg Weight: 1.7 kg Packaging: Ripstop fabric cover with DWR impregnation, with compression straps on fastex and a handle: 1 pc. Season: Three-season Floor covering: Polyester 70D Ripstop PU DWR PFC-Free FR, 8000 mm w.c. Inner tent: Polyester 70D DWR PFC-Free FR Outer awning: Polyester 70D Ripstop PU DWR PFC-Free FR, 3000 mm w.c. Equipment: Inner tent, outer awning, carrying bag, poles, pegs, guy ropes Frame: Arcs made of aluminum alloy Alu 7001 T6, ∅ 8.5 mm Capacity: Single Construction: Double layer Purpose: Universal Shape: Hemisphere Type: Tents