Description
The Bresser TemeoTrend P weather station records changes in barometric pressure and, based on these changes, displays a short-term forecast for the near future. The weather station also measures the temperature indoors and outdoors. The ability to connect additional sensors allows you to cover a fairly wide area for data measurement.
Characteristics of Bresser TemeoTrend P
Weather forecast:
- Weather forecast for 12 hours
- The weather station is capable of recording changes in barometric pressure and, based on these changes, displaying a short-term forecast for the near future in the form of barometric weather forecast symbols. The display shows symbols (clear, partly cloudy, cloudy, rain, shower)
Indoor air temperature:
- Units of measurement: ºС or ºF
- Measurement range: -5°C to 60°C (23°F to 140°F)
- Measurement accuracy: +/- 1°C or +/- 2°F
- Fixing Min/Max temperature values
Outside air temperature:
- Units of measurement: ºС or ºF
- Measuring range: -40°C to +60°C (-14°F to 140°F)
- Measurement accuracy: +/- 1°C or +/- 2°F
- Fixing Min/Max temperature values
- Sound signal when the temperature goes beyond -2°C +3°C (-28°F to 37°F)
Watch:
- The clock is automatically radio-controlled by a signal from Frankfurt (DCF-77). The signal is based on an atomic clock powered by the Cesium 133 atom and is under the jurisdiction of the Physics and Technology Federal Institute in Braunschweig (Germany). The error is less than one second in one million years. The exact time transmitted by the DCF77 transmitter is official in Germany. The transmitter is located in Mainflingen - 30 km from Frankfurt am Main and with its radius (about 1500 km) covers almost all of Europe and part of Ukraine. Please note that in the eastern regions of Ukraine the signal reception is unstable.
- Possibility of disabling radio control and selecting manual installation
- Time zone selection (time correction) -23/+23 hours
- Time format: 12 or 24
- Alarm clock with snooze function
Projection of time and internal temperature
- Possibility of continuous (from power supply) and short-term projection of time and internal temperature on a wall, ceiling or any other surface using a powerful, economical and long-lasting LED
- Projection color: red.
- Projection size: large, depends on the distance to the surface, the optimal projection distance is 1.7-2 meters; brightness: high (depends on illumination; clearly visible in semi-darkness and darkness).
Backlight:
- LED backlight, glow color - yellow
Transferring data from an external sensor:
- Data transfer frequency: 433 MHz
- Data transmission range: up to 30 m. line of sight
- Possibility of connecting up to 3 external sensors
Additionally:
- Sensor battery discharge indicator
Installation:
- Can be installed on a table.
Equipment:
- Station
- Temperature sensor C8340 (without display)
- Instructions
Nutrition:
- Station: 2 x AA batteries, LR6 1.5V
- Temperature sensor: 2 x AA batteries, LR6 1.5V
Overall dimensions:
- Station (L*W*H), mm: 130 x49 x 90
- External sensor (L*W*H), mm: 67 x 29 x 102
Color: white
Weight (g): 259
Recommendations for installing a wireless temperature and humidity sensor
In order to obtain accurate readings and extend the life of your sensor, we recommend that you install it in a protected location to avoid moisture and direct sunlight. Do not wrap the sensor in a plastic bag. We recommend installing it outside on the outside of a window as shown in the picture below or in any other suitable location.
.jpg)
