Bresser TemeoTrend AI weather station

The Bresser TemeoTrend AI weather station records changes in barometric pressure and, based on these changes, displays a short-term weather forecast for the near future. It also measures atmospheric pressure, temperature and humidity indoors and outdoors.

• Weather forecast for 12 hours
• The weather station is capable of recording changes in barometric pressure and, based on these changes, displaying a short-term forecast for the near future in the form of barometric weather forecast symbols. The display shows symbols (clear, partly cloudy, cloudy, rain, shower)

Atmospheric pressure:

• Units of measurement: hPa
• Indication of pressure change trend
• Graphical display of changes in atmospheric pressure in the form of a histogram over the past 12 hours

Room temperature:

• Units of measurement: ºС or ºF
• Measurement range: 0°C to +50°C (14°F to 140°F)
• Measurement resolution: 0.1°C or 0.2°F
• Measurement accuracy: +/- 1°C
• Temperature measurement interval: 20s
• Displaying the temperature change trend
• Automatic recording of minimum and maximum temperature values

• Units of measurement: ºС or ºF
• Measurement range: -20°C to +60°C(-4°F to 158°F)
• Measurement resolution: 0.1°C
• Measurement accuracy: +/- 1°C
• Displaying the temperature change trend
• Automatic recording of minimum and maximum temperature values

Indoor humidity:

• Units of measurement: % RH
• Measurement range: 20% to 90%
• Measurement resolution: 1%
• Displaying the humidity change trend
• Automatic recording of minimum and maximum humidity values

External humidity:

• Units of measurement: % RH
• Measurement range: 20% to 90%
• Measurement resolution: 1%
• Displaying the humidity change trend
• Automatic recording of minimum and maximum humidity values

• The clock is automatically radio-controlled by a signal from Frankfurt (DCF-77). The signal is based on an atomic clock powered by the Cesium 133 atom and is under the jurisdiction of the Physics and Technology Federal Institute in Braunschweig (Germany). The error is less than one second in one million years. The exact time transmitted by the DCF77 transmitter is official in Germany. The transmitter is located in Mainflingen - 30 km from Frankfurt am Main and with its radius (about 1500 km) covers almost all of Europe and part of Ukraine. Please note that in the eastern regions of Ukraine the signal reception is unstable.
• Possibility of disabling radio control and selecting manual installation
• Time zone selection (time correction) -23/+23 hours
• Time format: 12 or 24
• 2 independent alarms with snooze function.

• Display: date / month / day of week

• Data transfer frequency: 433 MHz
• Data transmission range: up to 30 m. line of sight
• Possibility of connecting up to 3 additional external sensors (purchased separately)
• Temperature and humidity sensor with display

Fastening:

• Console - vertical position: on a table or on a wall
• Sensor - vertical position: on a table or on a wall

• Station
• External temperature and humidity sensor
• Instructions

• Station: 2 x AA batteries, LR6 1.5V
• Temperature sensor: 2 x AAA batteries, LR6 1.5V

• Weather station (L*W*H), mm: 126 x 29 x 200
• External sensor (L*W*H), mm: 63 x 97 x 29

Weight:

• Weather station: 221g
• Thermo-hygro sensor: 54g

Wireless Temperature and Humidity Sensor Installation Guide

In order to obtain accurate readings and extend the life of your sensor, we recommend that you install it in a protected location to avoid moisture and direct sunlight. Do not wrap the sensor in a plastic bag. We recommend installing it outside on the outside of a window as shown in the picture below or in any other suitable location.