Description
Non-standard deep groove ball bearing 15×46×14 mm sealed (336-2RS / 180336)
Sealed single-row deep groove ball bearing of non-standard size 15×46×14 mm (international designation 336-2RS) is designed for installation in high-load rotating units, gearboxes, tensioner pulleys, electric motors, pumping equipment, and specialized machinery where the design specifies a 15 mm diameter shaft with an enlarged 46 mm outer housing seat. Due to the reinforced outer race, the bearing handles increased radial and moderate axial loads in both directions. Double-sided contact seals made of oil- and petrol-resistant nitrile butadiene rubber (NBR) with steel reinforcement (index 2RS) hermetically seal the internal cavity, retaining the factory grease and fully protecting the rolling elements from dust, moisture, abrasive particles, and cleaning solutions throughout its entire service life.
Key Advantages and Features:
- Rare non-standard size 15×46×14 mm (336-2RS): Allows for direct repair of original factory units without boring the housing seat or manufacturing adapter sleeves for the shaft.
- Reinforced outer race (D = 46 mm): The massive outer ring provides increased rigidity and resistance to radial runout and shock loads.
- Double-sided 2RS sealing: Contact rubber-to-metal seals on both sides prevent grease leakage and require no maintenance or additional lubrication during installation.
- High-carbon chromium bearing steel (GCr15 / ШХ15): Ground raceways and hardened balls ensure low noise levels, minimal friction, and stable operation at high speeds.
- Factory pre-lubricated: The bearing is filled with thermally stable lithium grease and is fully ready for installation right out of the box.
Compatibility and Application Area:
The bearing is used in various units and assemblies where the mounting dimensions match exactly (15 × 46 × 14 mm):
- Home appliances and power tools: shaft support units, drives, and gearboxes for specific washing machine models, food processors, industrial sewing machines, concrete mixers, compressors, and corded power tools.
- Automotive and motor vehicles: idler and tensioner pulleys for drive belts, alternator units, starters, steering systems, gearboxes, and hub/support mechanisms for motorcycles, scooters, ATVs, and snowmobiles.
- Industrial equipment, pumps, and agricultural machinery: circulation and vortex pumps, conveyor rollers, fan units, textile machines, and walk-behind tractor gearboxes.
- Analogs and cross-reference codes: 336-2RS, 336 2RS, 6336-2RS (non-standard), 180336 (according to GOST for sealed version), 336RS, 336LLU, 336DDU.
Technical Specifications:
| Parameter | Value / Specification |
|---|---|
| Product Type | Deep groove single-row ball bearing (non-standard) |
| Marking / Size | 336-2RS (15×46×14) |
| Inner diameter (d) | 15 mm |
| Outer diameter (D) | 46 mm |
| Width / Height (B) | 14 mm |
| Seal type | 2RS — double-sided contact rubber-to-metal seals (NBR) |
| Ring and rolling element material | Hardened chromium bearing steel (GCr15 / ШХ15) |
| Lubrication | Pre-applied
Ball radial bearings
Bearings
High-pressure washers Bearings
Latest updates
Power tools parts
Pressure washer spare parts
![]()
Shopping Assistant
|
