Guide bar 45cm 18" pitch .325" gauge 1.5mm for 72 links for installation on medium and high-power chainsaws BauMaster, GoodLuck, Grand, ProCraft, Craft-Tec, CanFly, Eltos, Foresta, Grunhelm, Vitals, Taiga, Belorus, Vityaz, Karpaty, Kedr, Ural, Parma 2M.

Equipped with a sprocket nose and a 1.5 mm groove for efficient oil delivery and reduced friction.

Compatible chain:

• Pitch: .325"
• Gauge: 1.5 mm (.058")
• Number of links: 72 DL

Main bar parameters

• Bar length 18” (45cm between centers)
• Groove width/drive link thickness: 1.5 mm (.058")
• Chain pitch: .325"
• Number of drive links: 72 pcs
• Number of cutters: 36 pcs

Can be used in Homelite chainsaw models: 250, 252, 290, 290C, 300, 340, 340C, 3850B, 3850C, 415B, 444, 4550B, HCS4040, HCS404 23 5, 346, 346XP, 350, 351, 353, 357, 357XP, 359, 36, 40, 41, 42, 435, 435E, 44, 440, 440e, 444, 445, 445e, 445e RANCHER, 460, 460 RANCHER, 50, 51, 55, 550, 560XP, T435; 24 2153, 2155, 2156, 2159 , 2163, 370, 380, 410, 420, 425, 435, 45, 450, 451, 451EVS, 452, 455, 490, 49SP, 50, 51, 510, 52, 5 521, 525, 535, 590, CS2149W, CS2152W;

Makita: 45, DCS430, DCS43001, DCS4300I, DCS431, DCS460, DCS4600S, DCS4630, DCS500, DCS5000, DCS5030, DCS520, DCS5200I;

Oleo-Mac: 850, 938, 940, 941, 942, 945, 946, 947, 950, 950 Super, 950A, 951, 952, 956, 962, E300F; PT: 1200EL, 1400EL, 1450EL, 1500EL, 1650EL, 365, 400, 405, 410, 450, 460, 465, 470, 495, 500, 510, 550;

Solo: 639, 641, 644, 645, 647, 650, 651, 652, 654, 656, 665;

Zenoah: G38, G410AVS, G415AVS, G455AVS, G46, G5000, G500AVS, G5300