Description
Keyed Drill Chuck 1.5–13 mm B12 Taper (∅43 mm, with Key) for Electric Drills and Machines
The all-metal three-jaw keyed drill chuck 1.5–13 mm with a B12 short taper mount is designed for the secure fixation of cutting and abrasive tools with cylindrical or triangular shanks ranging from 1.5 to 13 mm in diameter. It is suitable for use in corded electric drills, benchtop vertical drilling machines, lathes (via a Morse taper arbor), and drill mixers. The chuck body, with a diameter of 43 mm, is made of high-strength structural steel with an anti-corrosion black oxide finish and non-slip diamond knurling on the sleeve. The internal mounting socket is designed for a B12 taper (according to DIN 238 / GOST 9953, maximum taper diameter 12.065 mm), ensuring a rigid self-locking fit on the spindle without thread play and minimal radial runout when drilling metal, wood, and concrete. The set includes a reinforced T-shaped geared clamping key.
Key Advantages and Features:
- B12 Taper Mount (DIN 238): Provides high alignment and connection rigidity with the drill spindle or machine arbor, withstanding significant axial and radial loads when drilling large-diameter holes.
- Wide Clamping Range (1.5 – 13 mm): Allows working with both thin metal drill bits from 1.5 mm and large twist, spade, core bits, and attachments with shanks up to 13 mm.
- All-Metal Construction (43 mm outer diameter): The hardened three-jaw set and the geared rim of the sleeve are resistant to wear, tooth stripping, and impact loads.
- Maximum Clamping Force via Keyed Mechanism: Unlike keyless counterparts, the keyed chuck prevents the smooth cylindrical shank of the drill bit from slipping when jammed in viscous metals or when operating in reverse.
- Clamping Key Included: The T-shaped key with a long handle and guide pin ensures convenient and uniform tightening of the jaws in all three body holes.
Compatibility and Application:
The chuck is used to replace worn drill chucks with a B12 taper mount (not suitable for drills with 1/2"-20 UNF or 3/8"-24 UNF threaded mounts without a taper adapter):
- Corded Drills and Machines with B12 Taper Spindle: Domestic and imported electric drills (IE-1022, IE-1023, IE-1035, BES, Rebir, Fiolent, Interskol, Elprom, Zenit), benchtop drilling machines (2M112, NS-12, Einhell, Scheppach, JET, Bosch PBD, Procraft, Forte, Vitals), and MT1-B12 / MT2-B12 / MT3-B12 adapter arbors for lathes and milling machines.
- Applicable Accessories: HSS twist metal drill bits, wood and concrete drill bits, countersinks, taps, step drills, wire brushes, and grinding burrs with 1.5–13 mm shanks.
Technical Specifications:
| Parameter | Value / Characteristic |
|---|---|
| Product Type | Three-jaw keyed drill chuck |
| Clamping Range | 1.5 – 13 mm |
| Spindle Mount Type | B12 Taper (DIN 238 / GOST 9953, taper diameter 12.065 mm) |
| Outer Body Diameter (D) | 43 mm |
| Fixation Type | Keyed (geared rim + T-key) |
| Body and Jaw Material | Hardened tool steel with black oxide finish |
| Condition | New item |
Package Contents:
- Drill chuck 1.5–13 mm B12 (∅43 mm) — 1 pc.
- T-shaped clamping key — 1 pc.
Master's Tip: Before installing the new chuck onto the spindle taper, thoroughly wipe the internal B12 taper hole of the chuck and the mating taper of the drill shaft/arbor dry with a degreaser. No factory preservative grease, oil, or dust should remain on the tapers; otherwise, the chuck may slip or fall off under load. Fully retract the jaws into the body, place the chuck onto the taper by hand, and seat it with a light tap of a rubber or wooden mallet on the end of the body (do not strike the jaws or the geared rim with a steel hammer). For secure drill bit fixation, tighten the chuck with the key alternately in two or three holes around the circumference.

