Description
Keyed Drill Chuck 1.5–13 mm for M12×1.25 Metric Thread (with Key) for Electric Drill
The all-metal three-jaw keyed drill chuck 1.5–13 mm with M12×1.25 metric thread is designed for the rigid fixation of cutting and abrasive tools with cylindrical or triangular shanks from 1.5 to 13 mm in diameter in corded electric drills and drill mixers equipped with an M12 metric spindle with a fine pitch of 1.25 mm. The outer diameter of the tool's threaded shaft (spindle) for this chuck is exactly 12.0 mm (the chuck's internal threaded hole is 10.6–10.8 mm). The body is made of hardened structural steel with anti-corrosion bluing and diamond knurling on the sleeve. The package includes a reinforced T-shaped geared key, providing maximum clamping force for working with metal, wood, concrete, and construction mixtures.
Key Advantages and Features:
- Specialized M12×1.25 Metric Fit: Precisely matches electric drill shafts with 12 mm metric threads (1.25 mm pitch), ensuring a tight fit without play or misalignment.
- Maximum Clamping Force with Keyed Mechanism: The geared ring of the sleeve and the T-shaped key allow the jaws to be tightened significantly more than in a keyless chuck, preventing smooth drill bits from slipping during jamming or hammer drilling.
- Wide Clamping Range (1.5 – 13 mm): Securely holds both thin metal drill bits from 1.5 mm and large spiral, spade, core bits, and mixer attachments with shanks up to 13 mm.
- All-Metal Wear-Resistant Construction: Hardened tool steel jaws and a steel body withstand high radial and axial loads.
- Through-Hole for Locking Screw: Allows for additional fixation of the chuck on the spindle using a left-hand thread screw for safe operation in reverse mode.
Compatibility and Application:
The chuck is used to replace worn-out drill chucks on corded and cordless drills with an M12×1.25 spindle (12.0 mm shaft diameter, 1.25 mm fine pitch):
- Compatible Electric Drills and Mixers: IE-1035, Fiolent (specific drill and mixer models), Rebir, Interskol, Elprom, Vityaz, Ritm, Proton, Almaz, Zenit, Dnipro-M, Forte, Vitals, Sturm, Stern, Einhell, Sparky (in modifications with M12×1.25 spindle thread).
- Important Difference from the Inch Standard: Do not confuse the metric M12×1.25 thread (12.0 mm shaft diameter) with the most common 1/2"-20UNF inch standard (12.7 mm shaft diameter, 1.27 mm pitch) — an M12 chuck will physically not screw onto a 1/2" (12.7 mm) shaft.
Technical Specifications:
| Parameter | Value / Specification |
|---|---|
| Product Type | Three-jaw keyed drill chuck |
| Clamping Range | 1.5 – 13 mm |
| Mounting Thread | Metric M12 × 1.25 (right-hand thread) |
| Thread Dimensions in Millimeters | Drill shaft outer diameter: 12.0 mm (chuck inner hole ~10.7 mm), thread pitch: 1.25 mm |
| Outer Body Diameter (D) | ~42 – 43 mm |
| Tool Fixation Type | Keyed (geared ring + T-shaped key) |
| Material | Hardened tool steel with bluing |
| Condition | New product |
Package Includes:
- Drill chuck 1.5–13 mm M12×1.25 — 1 pc.
- T-shaped clamping key — 1 pc.
Pro Tip: Before purchasing, be sure to measure the outer diameter of the thread on your drill shaft with a caliper (or check the marking on the body of the old chuck): for M12×1.25 thread, the shaft diameter is exactly 11.9–12.0 mm, while for the more common 1/2"-20UNF thread, it is 12.6–12.7 mm. When removing the old chuck, first fully open the jaws and unscrew the central locking screw from the inside — it has a left-hand thread, so it unscrews clockwise! The chuck body itself unscrews from the spindle in the standard counter-clockwise direction.

