Description
Commutator rotor (armature) of the electric shaver motor Kharkiv 6, 15, 15M (L=50 mm, ∅24 mm)
Original commutator rotor (armature) of the electric motor with a face-type commutator is designed for the repair and restoration of classic Soviet and Ukrainian rotary electric shavers of the Kharkiv 6, Kharkiv 15, Kharkiv 15M, and Kharkiv 15-Avto series. The armature design follows the proprietary scheme of the "Electrobritva" plant (Kharkiv) with a flat face-type copper commutator, a two-pole laminated core with factory-impregnated copper winding using high-temperature varnish, and factory dynamic balancing (drilled recesses on the iron poles). The total shaft length is 50 mm, the outer diameter across the poles is 24 mm, the shaft mounting diameter on the commutator side is 4.5 mm, and on the cutter block gearbox side, there is a two-stage step with diameters of 4 mm and 3 mm for installing the drive pinion gear.
Key Advantages and Features:
- Original factory part (Kharkiv): Fully complies with the standard parameters of the Kharkiv shaver electric motor powered by 220 V / 127 V mains (depending on the voltage switch position on the shaver body).
- Flat face-type copper commutator: Ensures stable contact with the brushes, minimal sparking during high-speed operation, and a long service life for the brush-commutator assembly.
- Factory dynamic balancing: Balancing cutouts on the electrical steel stack completely eliminate vibration and excess noise of the electric shaver during shaving.
- Winding impregnation with heat-resistant compound: The copper winding wire is securely fixed with insulating varnish, preventing inter-turn short circuits and conductor breakage from centrifugal loads.
- Precise stepped shaft geometry: Ground shaft journals (4.5 mm and 4/3 mm) ensure smooth rotation in bronze-graphite sleeve bearings without runout or jamming.
Compatibility and Application:
Used for direct replacement of a burnt-out, jammed, or commutator-worn armature in the following electric shaver models:
- Kharkiv electric shavers (KhZEA / "Electrobritva"): Kharkiv 6, Kharkiv 15, Kharkiv 15M, Kharkiv 15-Avto, Kharkiv 21, Kharkiv 22, Kharkiv 25 (modifications with a similar two-pole commutator motor and a shaft length of 50 mm).
- Other models: certain modifications of Era, Berdsk, Agidel rotary electric shavers (subject to full match of 50×24 mm dimensions and shaft mounting diameters of 4.5 mm and 4/3 mm).
Technical Specifications:
| Parameter | Value / Specification |
|---|---|
| Part type | Commutator rotor (armature) of the electric shaver motor |
| Compatible models | Kharkiv 6, Kharkiv 15, Kharkiv 15M, Kharkiv 15-Avto and similar |
| Total rotor length (L) | 50 mm |
| Overall diameter (D) | 24 mm |
| Shaft diameter (short side, at the commutator) | 4.5 mm |
| Shaft diameter (long side, drive side) | Stepped: 4 mm and 3 mm |
| Commutator type | Face-type (flat), copper |
| Condition | Original spare part |
| Completeness | Available with gear + 35 UAH |
Package Includes:
- Commutator rotor (armature) of the electric motor


