Description
Brushes, 6 x 9 mm in cross-section, 11 mm in length, for the Makita HR 2450 rotary hammer, without a slot
| Smaller side of the section, mm |
6 |
| Large side of the section, mm |
9 |
| Wire output |
with a spring |
| Contact |
flower |
| Contact diameter/width d/h, mm |
8 |
| Number of slots in the body |
without slits |
| Wire length, mm |
18 |
-
Brushes (with slots) 6*9-h12 mm for a hammer drill on clamps
Regular price €1.31 EURRegular price -
Engine (motor) carbon brushes 6*9-L12 pins cut heel 8*9
Regular price €1.26 EURRegular price -
Angle grinder/ electric saw carbon brushes 6*9-13 with a 9 mm heel
Regular price €1.27 EURRegular price -
Brushes 6*9*16 for angle grinder Makita GA5030 with contacts in the form of the letter G
Regular price €1.4 EURRegular price -
Brushes 6*9-L16 with wires from the end and straight terminals
Regular price €1.44 EURRegular price -
Makita Hr 2450 rotary hammer motor armature d31.8 L151.8-110.2 t5
Regular price €13.54 EURRegular price -
Makita HR 2450 hammer drill trigger switch FA2-4/1BEK-6 4(3)A 250V~5E4
Regular price €6.43 EURRegular price
