Description
Flat pulp ejector disc (ejector) for electric juicer Rosinka 106 (SVSP-106)
Original flat plastic pulp ejector disc (ejector plate) is designed for installation in centrifugal household electric juicers Rosinka 106 (SVSP-106) and structurally compatible models. The part is mounted on the drive unit directly under the mesh drum (centrifuge) and serves for the directed removal of squeezed pulp into the receiving tray/container, and also protects the motor shaft mounting unit from juice and pulp residue. Made by injection molding from high-impact food-grade polymer resistant to fruit and vegetable acids and mechanical loads at high speeds.
Key Advantages and Features:
- Food-grade chemically neutral plastic: Safe white polymer does not react with acidic juices (apple, tomato, citrus), does not stain, and does not emit foreign odors.
- Efficient pulp ejection without clogging: The smooth flat geometry of the working surface prevents wet pulp from sticking and ensures its uniform discharge into the waste compartment during centrifuge rotation.
- Precise shaft centering: The reinforced central hub with a ring collar guarantees a tight coaxial fit without radial runout or vibration during extraction.
- Motor compartment protection: Covers the gap around the drive unit, preventing liquid from leaking into the oil seal and motor bearings.
Compatibility and Application:
Used in household centrifugal electric juicers of domestic and CIS production with a standard pulp ejection unit:
- Rosinka: SVSP-106, Rosinka 106 (all modifications with manual/automatic pulp ejection).
- Elvo: SVSP-302, SVSP-302M (if the hub mounting diameter and outer dimension match).
- Purpose: Restoring standard operation of the pulp removal system in case of breakage, cracking, or wear of the old disc's mounting hole.
Technical Specifications:
| Parameter | Value / Characteristic |
|---|---|
| Part type | Flat pulp ejector disc (pulp ejector) |
| Compatible models | Rosinka 106 (SVSP-106), Elvo SVSP-302 |
| Design | Round flat disc with a central reinforcing hub |
| Material | High-impact food-grade plastic (polypropylene / ABS) |
| Color | White |
| Condition | New spare part |
Package Contents:
- Flat pulp ejector disc for electric juicer — 1 pc.
Master's Tip: Increased noise, plastic rubbing against the housing, or pulp accumulation under the centrifuge mesh is often caused by deformation or a crack in the ejector disc. Before installing the new part, clean the drive shaft mounting seat and the juice collector tray from dried pulp residue. Install the disc strictly without tilting until the central bushing is fully seated, then check the free rotation of the unit by hand before plugging the appliance into the network. Do not wash plastic juicer parts in water hotter than +60 °C or in a dishwasher to avoid thermal deformation of the disc surface.
