Description
Screw assembly (screw pair) for deep-well screw pump 0.37–0.75 kW (A36 / B04)
Repair screw assembly (chrome-plated steel rotor and shaped rubber sleeve) is designed to restore operating pressure and nominal head in submersible borehole and well screw pumps with a diameter of 3 and 4 inches and power from 0.37 to 0.75 kW. The mechanism operates on the positive displacement principle: a polished worm rotates inside a profiled elastic stator sleeve, continuously pushing water from the suction zone into the discharge pipe and ensuring stable flow even with low well yield.
Key advantages and features:
- Wear-resistant chrome-plated rotor: The metal spiral screw is made of durable alloy steel with a polished anti-corrosion coating, reducing friction and resistant to abrasive wear from fine sand.
- Shaped rubber stator sleeve (NBR): The profiled inner and outer surface of the rubber sleeve ensures a tight fit to the screw and optimal load distribution on the motor without overloading.
- Support cap with cable slots: The 67 mm diameter rubber flange is equipped with special technological slots for correct centering of the stator in the pump sleeve and safe routing of the power cable.
- Coupling with M12 left-hand thread: The rubber-metal adapter coupling has an internal left-hand thread (M12L), preventing spontaneous unscrewing of the worm during normal motor shaft rotation.
- Ready-to-use repair kit: Supplied as a lapped pair (worm with coupling + sleeve), ready for quick installation in the pump.
Compatibility and application range:
Used for deep-well equipment with power of 0.37 kW, 0.55 kW, and 0.75 kW from the following series and manufacturers:
- Sprut / Насосы плюс оборудование: 3SQGD 1-30-0.37 (A36), 3SQGD 1-40-0.55, 3SQGD 1-65-0.75 (A36), 3QGD 0.37–0.55 kW.
- Rudes: series (B04) — 3S 0,8-30-0,37; 3S 0,8-40-0,5; 3S 0,8-30-0,37.
- Vitals aqua: 3DS 1027-0.5r, 3DS 1253-0.75r.
- Zegor: 3QGD1 1.2-30-0.37, 3QGD1.2-50-0.55.
- Euroaqua: 3QGD 1.2-40-0.55, 3QGD 1.5-120-0.75.
- Volks Pumpe / Lider: 3QGD 1.5-90-0.55, 3QGD 1.5-120 (0.75 kW).
- Werk / IBO / Eurotec: Werk 4QGD 1.8-50-0.5, IBO SQIBO 0.75 and other submersible screw units if the geometric parameters of the hydraulic unit match.
Technical specifications:
| Parameter | Value / Specification |
|---|---|
| Part type | Screw pair assembly (rotor + sleeve / worm + stator) |
| Series / Marking | A36 / B04 |
| Pump power | 0.37 kW, 0.55 kW, 0.75 kW |
| Total length of worm with coupling | 144–146 mm |
| Length of the screw part of the rotor | ~100 mm |
| Worm diameter | 15.5–16 mm |
| Support cap (flange) diameter | 67–68 mm (with wire slots) |
| Shaped sleeve barrel diameter | 36 mm |
| Stator sleeve length | ~84 mm |
| Coupling thread to shaft | M12, left-hand thread |
See also in:
Latest updates
Spare parts for submersible pump
Submersible pump screw auger
Water Pump Spare Parts
![]() ![]() ![]() ![]()
Shopping Assistant
|







