Description
Double basting Ferrino Force 2 Light Gray (91135LIIFR) is complementary to the Ferrino Light Line ultra-light basting series. This model has a number of distinguished design features that allow it to be carried out on hikes with advanced foldability in case of significant rainfall and gusts of wind. The frame is folded from three aluminum arches, which provides three points of mutual support and six points of support. This doubles the resistance of the tent to wind and snow conditions compared to the standard dome frame in the form of a pusphere. An external awning is attached to the frame itself, which allows you to keep the inner tent dry when installed under the board, and also save time. A significant part of the internal basting is made up of a mosquito net, so the basting will be comfortable on a sunny summer night. The double-sided Ferrino Force 2 Light Gray (91135LIIFR) has two vestibules and two entrances from the opposite sides, allowing both tourists to use it without respecting one to the other. The outer awning has a water protection capacity of 3000 mm of water. Art., which is sufficient to keep the dough dry in the middle for an hour. The effective Camera Air ventilation system is complemented by two ventilation windows that help eliminate condensation.
Features:
- The non-standard dome-shaped geodesic structure of the frame with three arches is designed to significantly increase the resistance of the frame to the six points of support and the three points of the beam of the arches. This design makes it possible to install a tent without fixing the spikes, which is especially important when installed in the snow, sand, or in places where the relief does not allow for reliable fixation of the spikes. In addition, such a design reliably fixes the injury of the entrance before marking.
- The internal tarpaulin is attached to the outer awning using special fittings. This allows you to protect the internal tent and the outer awning by installing it for one hour, and also keep the internal tent dry when installing the board for an hour. If necessary, the internal tarpaulin can be removed and the external awning can be covered.
- The outer awning is secured to the arches using additional hooks.
- Marking of arcs is made for additional preparation in a variety of colors.
- The design includes two ventilation windows, located opposite each other above the entrances. The Camera Air ventilation system creates a large air chamber between the outer awning and the inner awning, which ensures strong air circulation. On one side, this prevents the appearance of condensation in the middle, and on the other, it reduces the heat-insulating layer.
- The material of the outer awning and the inner tent has three times the strength at the points of transfer to greater strength. Strengthened Vikonane in the appearance of an additional ball of high-value fabric.
- In the middle there is a volumetric bowl for folding mosquito nets for doors and placing other dustbins.
- Arc retainers, molded into tassels, made of aluminum.
- A plan to own a hook for hanging up a camping lighter.
- Aluminum strands have a six-layer profile, which results in increased durability and improved fixation on ground.
